TYPE G; the specially constructed binaural (stereo) dynamic headphones. Features: closed system designed for the extra high loading (138 dB SPL continuously), minimal distortion, excellent transient response, frequency range from 10 Hz to 18 kHz, impedance 70 ohms, very soft aircushions made of non allergenic polyurethane, stainless steel headband and self-adjusting pivoting yokes which enable a comfortable fit over a wide range of head sizes, extra robust construction for the long durability and very reliable intensive exploitation.

Probably the best headset on the world for the rehabilitation of the deaf people.

TYPE GM; the special monaural headset. It has the same electroacoustic and mechanical features as TYPE G, but with single phone. On the opposite side of the headband, a special small cushion is mounted, to achieve a comfortable fit over a wide range of different head sizes.
This monaural headset is intended for the additional simultaneous electroacoustic stimulation of non implanted ear of people with cochlear implant. This treatment is also very good preparation for the application of conventional electroacoustic hearing aid on the non implanted ear.

TYPE GM should be connected to one of VERBOTON apparatuses.

LS 30; the special high quality small dimensional loudspeaker enclosure, mounted on the special adaptive stand, for the quality sound stimulation of people with cochlear implant. LS 30 should be placed near implanted ear and should be connected to one of VERBOTON apparatuses. Frequency range of LS 30 is from 100 Hz to 18 kHz, maximal power is 30 W (sinus) and impedance 8 Ohms.

ECM 10S / L; the hand held electret condenser microphone with omnidirectional polar pattern. Features: frequency range from 5 Hz to 18 kHz, sensitivity 5.6 mV/Pa, extra robust metal (stainless steel) construction resistant to the crush, special large diameter extra flexible cord (free of the handling loops and knots).

Cord length: 2 m (model S) or 5 m (model L)

KERVIB M35; the special electromagnetic bone oscillator (vibrator) for the somatosensory stimulation of the hearing impaired children. Frequency range is extended to the infrasound area (to 1Hz).

BIGVIB M8; the special, very strong electromagnetic actuator (vibrator: 50 W, 8 Ω) to be built on the boottom side of the vibrating board. This board can be made by your local carpenter according to our technical documentation (supplied free). The related frequency range extends from deep infrasound area to the middle speech area (1 Hz - 3 kHz)

BIGVIB M8 is equipped with special large diameter and extra flexible cord (free of handling loops and knots).

VT 40; the vibrating board for the somatosensory stimulation of the hearing impaired children, with speech or music signals. An active area of 40x40 cm provides partial or whole body stimulation. VT 40 is suited for individual and small group work. The vibrations are generated by very strong electromagnetic actuator BIGVIB M8. The related frequency range extends from deep infrasound area to the middle speech area (1 Hz - 3 kHz). VT 40 is ergonomically designed and constructed of massive spruce wood. It should be connected to the one of apparatuses from family VERBOTON.

VT 40 is very suitable for the somatosensory stimulation of children with Cochlear Implant (CI).

INL 100; individual induction neck loop system with two-LEDs magnetic field level indicator. It must be connected to one of VERBOTON apparatuses and thus provides very quality wireless (inductive) transmission of audio signal to CI speech processor, or to the conventional electroacoustic hearing aid. The related telecoils, built in the speech processor and/or hearing aid, must be enabled and switched ON.

LRV 1+1; desktop distribution box (panel) for connection of one binaural headset and one vibrator with the separated loudness adjusters (L and R). The group of more units (panels) is equipped with adequate interconnection cables.

DB 4+2; the distribution box for connection of four headsets and two vibrators with the separated loudness adjusters (L and R) for each headset, intended for the mobile installation within the group work.

DB 6+2; the distribution box for connection of six headsets and two vibrators with the separated loudness adjusters (L and R) for each headset, intended for the mobile installation within the group work.